Dell 3333DN User Manual Download Page 157

Page: 157 / 303

Paper menu

Default Source menu

Menu item

Description

Default Source

Tray <x>
MP Feeder
Envelope Feeder
Manual Paper
Manual Env

Sets a default paper source for all print jobs
Notes:

•

Tray 1 (standard tray) is the factory default setting.

•

Only an installed paper source will appear as a menu setting.

•

A paper source selected by a print job will override the Default Source

setting for the duration of the print job.

•

If the same size and type of paper are in two trays and the Paper Size and

Paper Type settings match, then the trays are automatically linked. When

one tray is empty, the job prints using the linked tray.

•

From the Paper menu, Configure MP must be set to Cassette in order for

MP Feeder to appear as a menu setting.

Paper Size/Type menu

Configure MP menu

Menu item

Description

Configure MP

Cassette
Manual

Determines when the printer selects paper from the multipurpose feeder
Notes:

•

Cassette is the factory default setting.

•

The Cassette setting configures the multipurpose feeder as an automatic

paper source.

•

When Manual is selected, the multipurpose feeder can be used only for

manual feed print jobs.

Substitute Size menu

Menu item

Description

Substitute Size

Off
Statement/A5
Letter/A4
All Listed

Substitutes a specified paper size if the requested paper size is not available
Notes:

•

All Listed is the factory default setting. All available substitutions are

allowed.

•

The Off setting indicates no size substitutions are allowed.

•

Setting a substitution lets the job print without a Change Paper message

appearing.

Understanding printer menus

157

Summary of Contents for 3333DN
















































































































































































































































































































Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands

Dell 3333DN, User Manual

Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands