Fax partition inoperative. Contact system administrator.
The fax partition appears to be corrupted. Try one or more of the following:
•
Touch Continue to clear the message.
•
Turn the printer off and then back on to reset the printer. If the message appears again, then contact your system
support person.
Fax server 'To Format' not set up. Contact system administrator.
The printer is in Fax Server mode, but the Fax Server setup has not been completed.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Complete the Fax Server setup. If the message appears again, contact your system support person.
Some held jobs were not restored
Touch Continue to delete the specified job.
Note: Some held jobs are not restored. They stay on the hard disk and are inaccessible.
37 Insufficient memory, some held jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Touch Continue to clear the message.
57 Configuration change, held jobs were not restored
Since the time the jobs were stored on the printer hard disk something has changed in the printer to invalidate the
held jobs. Possible changes include:
•
The printer firmware has been updated.
•
Paper input, output, or duplex options needed for the print job were removed.
•
The print job was created using data from a device in the USB port and the device is no longer in the port.
•
The printer hard disk contains jobs that were stored while installed in a different printer model.
Touch Continue to clear the message.
Load <input src> with <Custom Type Name>
Try one or more of the following:
•
Load the specified paper in the tray.
•
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
•
Cancel the current job.
Troubleshooting
257
