Dell 3333DN User Manual Download Page 130

Page: 130 / 303

Telephone or a telephone with an integrated answering

machine

Connecting to an adapter for your country or region

The following countries or regions may require a special adapter to connect the telephone cable to the active

telephone wall jack:

Country/region

•

Austria

•

Cyprus

•

Denmark

•

Finland

•

France

•

Germany

•

Ireland

•

Italy

•

New Zealand

•

Netherlands

•

Norway

•

Portugal

•

Sweden

•

Switzerland

•

United Kingdom

Countries or regions except Austria, Germany, and Switzerland

For some countries or regions, a telephone line adapter is included in the box. Use this adapter to connect an

answering machine, telephone, or other telecommunications equipment to the printer.

Connect one end of the telephone cable that came with the printer to the printer LINE port .

Note: There is a special RJ-11 plug installed in the printer EXT port . Do not remove this plug. It is necessary

for the proper operation of the fax function and connected telephones.

Connect the other end of the telephone cable to the adapter, and then connect the adapter to the active telephone

wall jack.

Note: Your telephone adapter may look different than the one shown. It will fit the wall jack used in your location.

Faxing

130

Summary of Contents for 3333DN
















































































































































































































































































































Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands

Dell 3333DN, User Manual

Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands