manualshive.com logo in svg

Dell 3333DN, User Manual, Page: 229 / 303

Share
Download
Dell 3333DN User Manual Download Page 229

5

Reinstall the separator roll.

6

Lock the separator roll.

7

Close the ADF cover.

Adjusting scanner registration

Scanner Registration is a process to align the scan area with the paper location. To manually adjust the scanner

registration:

1

Turn the printer off.

2

Clean the scanner glass and backing material.

3

Hold down   and   until the progress bar appears.

4

Release the buttons.
The printer performs a power-on sequence, and then the Diagnostic menu appears.

5

Touch the up or down arrow until 

Scanner Test

 appears.

6

Touch Scanner Test.

7

Touch the up or down arrow until 

Scanner Manual Registration

 appears.

8

Touch Scanner Manual Registration.

Maintaining the printer

229

Summary of Contents for 3333DN
















































































































































































































































































































Reviews:

No comments