manualshive.com logo in svg

Dell EMC PowerEdge R7525, Installation And Service Manual, Page: 19 / 209

Share
Download
Dell EMC PowerEdge R7525 Installation And Service Manual Download Page 19

Right control panel view

Figure 8. Right control panel view

Table 4. Right control panel 

Item Indicator or button

Icon

Description

1

VGA port

Enables you to connect a display device to the system. For
more information, see the 

Technical Specifications

 section.

2

iDRAC Direct port (Micro-AB USB)

The iDRAC Direct port (Micro-AB USB) enables you to
access the iDRAC Direct Micro-AB features. For more
information, see the 

iDRAC User's Guide

 available at

https://www.dell.com/idracmanuals

 .

NOTE:

 You can configure iDRAC Direct by using a

USB to micro USB (type AB) cable, which you can
connect to your laptop or tablet. Cable length
should not exceed 3 feet (0.91 meters).
Performance could be affected by cable quality.

3

USB 2.0-compliant port

The USB port is a 4-pin connector and 2.0-compliant. This
port enables you to connect USB devices to the system.

4

Power button

Indicates if the system is powered on or off. Press the
power button to manually power on or off the system.

NOTE:

 Press the power button to gracefully shut

down an ACPI-compliant operating system.

NOTE:

 For more information on the ports, see the 

Ports and connectors specifications

 section.

System overview

19

Summary of Contents for PowerEdge R7525


















































































































































































































Reviews:

No comments