manualshive.com logo in svg

Dell EMC PowerEdge R7525, Installation And Service Manual, Page: 104 / 209

Share
Download
Dell EMC PowerEdge R7525 Installation And Service Manual Download Page 104

Table 42. Configuration 2: R1B+ R4B (continued)

Card type

Slot priority

Maximum number of cards

Broadcom (NIC: 10 Gb)

1, 2, 7

3

QLogic (NIC: 10 Gb)

1, 2, 7

3

Intel (NIC: 10 Gb)

1, 2, 7

3

Intel (NIC: 1 Gb)

1, 2, 7

3

Broadcom (NIC: 1 Gb)

1, 2, 7

3

Dell PERC Adapter

1, 2, 7, 8

3

Samsung (PCIe SSD)

1, 2, 7, 8

3

Intel (PCIe SSD)

1, 2, 7, 8

3

Dell Front PERC

Internal slot

1

Broadcom (OCP: 25 Gb)

Internal slot

1

QLogic (OCP: 25 Gb)

Internal slot

1

Mellanox (OCP: 25 Gb)

Internal slot

1

SolarFlare (OCP: 25 Gb)

Internal slot

1

Intel (OCP: 25 Gb)

Internal slot

1

Intel (OCP: 10 Gb)

Internal slot

1

Broadcom (OCP: 10 Gb)

Internal slot

1

QLogic (OCP: 10 Gb)

Internal slot

1

Broadcom (OCP: 1 Gb)

Internal slot

1

Intel (OCP: 1 Gb)

Internal slot

1

Table 43. Configuration 3: R1A + R2A + R3A + R4A 

Card type

Slot priority

Maximum number of cards

Dell Serial

4

1

NVIDIA (GPU - Low Profile)

3, 6

2

NVIDIA (GPU - Full Height)

2, 5, 7

3

Xilinx (Accelerators - FPGAs - Full Height)

2, 5, 7

3

Dell BOSS Adapter (Full Height)

2, 5, 7

1

Dell BOSS Adapter (Low Profile)

3, 6

1

Dell PERC Adapter

3

1

Mellanox (NIC: 100 Gb - Full Height)

2, 5, 7

3

Mellanox (NIC: 100 Gb - Low Profile)

3, 6

2

Intel (NIC: 25 Gb - Full Height)

2, 5, 7

3

Intel (NIC: 25 Gb - Low Profile)

3, 6

2

Mellanox (NIC: 25 Gb - Full Height)

2, 5, 7

3

Mellanox (NIC: 25 Gb - Low Profile)

3, 6

2

104

Installing and removing system components

Summary of Contents for PowerEdge R7525


















































































































































































































Reviews:

No comments