manualshive.com logo in svg

Delem DA-66T, Reference Manual

Share
Download
Delem DA-66T Reference Manual Download Page 214

V0913, 10.54

10.13. System information

On this tab system information can be found. Next to version information on the software also 
ID’s of the installed modules and version of OEM-specific files can be read.

Next to information also software update functionality is available here.
 

This screen shows detailed information about the control system. This information is useful for 
service purposes.

Application

The version of the current application 

Option ID

 The unique option ID of the control

Sequencer

 The version number of the running sequencer

Delem.def

The version number of the running delem.def file

Modules

The programmed modules with ID and flash version. This list of modules might contain 
more than 4 items; in that case the list can be scrolled.

Update software

With Update Software the control can install a software update set from a USB-memory 
device. The directory browser will help to select the desired update and initiate the installation 
process.

Summary of Contents for DA-66T



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands