Delem DA-66T, Reference Manual

Page: 179 / 218

V0913, 10.19
10.3.2. Create a new die
To create a new tool, tap Edit in the die library and subsequently use New. The control will
start by asking for the required tool shape and tool identification name (ID).
Shape
A selection must be done from the different available basic die shapes corresponding to
the required die action. Options are:
• Standard Die shape as normally used for air bending and basic bottoming.
• Hem Bend Die as typical tool with flat top for specific hem bends.
• Inside Hem Bend Die as tool for air bends and hem function.
• Air + Hem Bend U Die shape for air bends and specific hem function.
• Multi-V Die for dies with multiple V and or U openings.
ID
A unique name or number to identify the tool. The maximum length is 25 characters.
The ID and description parameters may also contain alphanumeric characters.
When finished, Accept to leave this window and start with the tool data parameters. The
control will start by prompting a pop-up window for the tool properties starting with the initial
dimensions of the tool.