manualshive.com logo in svg

Delem DA-66T, Reference Manual

Share
Download
Delem DA-66T Reference Manual Download Page 199

V0913, 10.39

Tap Edit Drawing to make the backgauge drawing appear wherein the dimensions of the back 
gauge finger can be programmed.

The following parameters describe the dimensions of the back gauge and the lay-on positions. 
The number of parameters that has to be programmed depends on the number of gauge 
positions. If more gauge positions are programmed, more parameters are offered. The 
illustration at the bottom of the screen will change according to the number of gauge positions.

Finger height

The height (or thickness) of the first back gauge finger tip.

Gauge height

The height of the different finger levels.

Finger length

The length of the first finger level.

Gauge length (L2/L3)

The length of additional lay-on levels.

Gauge length (L1)

The length of the finger level at the bottom of the gauge.

Summary of Contents for DA-66T



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands