manualshive.com logo in svg

Delem DA-66T, Reference Manual

Share
Download
Delem DA-66T Reference Manual Download Page 182

V0913, 10.22

Following functions are available while drawing

Delete Line

To delete a line segment.

Change Height

To change the height dimension of the tool.

Auto Finish

Finishing the tool outline to the top of the tool automatically.

Reset Drawing

To reset the programmed drawing of the tool till the basic, initial shape.

Properties

To change the specific properties of the line or angle, add or remove a radius, change the 
length, etc. It is e.g. possible to add a radius in the outline of the tool. 

Tool Properties

To change the generic tool data and description.

Description

A name or description of this tool. The maximum length is 25 characters. This 
description has already been entered in the beginning defining the tool, but can be 
edited in this field. The description is listed in the tool overview of the library.

Summary of Contents for DA-66T



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands