manualshive.com logo in svg

Delem DA-66T, Reference Manual

Share
Download
Delem DA-66T Reference Manual Download Page 16

V0913, 1.10

1.5.6.

The Auto menu and Manual menu, production modes

A product program can be executed via the Auto mode. In Automatic mode, a complete 
program can be executed bend after bend. In the Auto mode the Step mode can be selected 
to have each bend started separately.

The Manual mode of the control is an independent production mode. In this mode, one bend 
can be programmed and executed. It is typically used to test the behaviour of the bend 
system.

More information about this can be found in chapters 7 and 8.

1.5.7.

Back-up data, external storage

Both product and tool files can be stored externally. Depending on the configuration, these 
files can be stored on a network or on a USB storage device. This facilitates a back-up of 
important data and the possibility to exchange files between Delem controls.

More information about this can be found in chapter 9.

Summary of Contents for DA-66T



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands