43
processing coin
Operating the sorter
Inspection
Pan
FIGURE #37
INSPECTION PAN
DO NOT PLACE HANDS IN FUN-
NEL AREA WHEN SORTER IS
OPERATING AND INSPECTION
PAN IS FORWARD.
NEVER ALLOW LONG HAIR OR
LOOSE CLOTHING, (TIES, ETC.)
NEAR FUNNEL AREA WHEN
SORTER IS OPERATING.
1. Move the Power Switch, located on the right
side of the Sorter to the “ON” position.
2. Observe the Display. It should be at the
“HOME” position (showing “BATCH TOTAL”
and “00” ).
3. Place the coins for the first batch in the In-
spection Pan and remove any unwanted ob-
jects.
Note:
All Coin Bags must be in position for
the Sorter to operate. If one or more bags
are not properly installed a display message
will appear indicating which station is in er-
ror. Install a Coin Bag at that station. The
Display will return to the HOME SCREEN.
4. Press the MOTOR ON / OFF Key on the
Control to start the Sorting Motor.
5. Lift and tilt the Inspection Pan to transfer the
coins into the Sorting Area. The (optional)
magnet will catch metal (metallic) items such
as slugs, washers, paper clips, etc., that
should not enter the Sorter.
6. When the sorting is complete, press the
MOTOR ON / OFF Key on the Control to
stop the Sorting Motor. (The Sorting Motor
stops automatically approximately seven (7)
seconds after the last coin has been
processed if left unattended.)
1.00 BAG NOT INSTALLED
INSTALL BAG
