101
communications error
Operator display messages
An error has occurred at the port shown on
the Display. Check all physical connections
between Sorter and Peripherals. If all con-
nections are proper, check the port parame-
ters and resume operation. If the problem
persists, contact your Authorized Service
Representative for assistance.
Note:
Port “x” in the above figure represents
the port that has the error.
--CHECK PORT X RS232 PARAMETERS
PORT X COMM ERROR
--INSURE CABLE IS PROPERLY CONNECTED
--INSURE PERIPHERAL DEVICE IS
OPERATING PROPERLY
FIGURE #90
COMMUNICATIONS ERROR
