DFDVR2
42
6-3-3: CLIENT SOFTWARE INTERFACE
Use this client software to access your DVR on your internal network.
1. Live Display
Remote DVR Live display
2. Current Status
To show the current connection status
3. Screen Split
To select Full/4/9/16 split screen display
4. PTZ Camera Control
To control PTZ Camera Zoom/Focus/Direction
Remote Control of PTZ (optional):
1) Set up PTZ on the DVR first
2) Set up PTZ from the client software
5. Sequence
Full screen sequencing.
6. Channel Selection
To select CAM1~4 when full or split screen display.
7. Connect
To select a DVR IP address from IP list for connection.
8. Disconnect
To disconnect the DVR.
9. Playback
To enter playback.
10. Setup
To enter the client software setup (see Section 6-3-4 for details)
11. Power
To close the remote program. The connection to the DVR will be terminated after the
remote software is closed.
