DFDVR2
19
4-4: CONFIGURATION
1. HDD MANAGEMENT
- This screen includes HDD SETUP (HDD Clear), and
HDD INFORMATION.
2. CAMERA SETUP
- This screen includes CAMERA TITLE and BRIGHTNESS,
CONTRAST, SATURATION, HUE
3. MOTION SETUP
- This screen includes SENSITIVITY, DURATION, and DETECT CELL
NUMBER settings.
4. INTERVAL SETUP
- Sets up the switch interval time of the Full screen and the
PIP screen.
5. TIME/DATE SETUP
- Programs the system date and time.
6. PASSWORD SETUP
- Create/change the system password.
7. BUZZER SETUP
- Sets the Buzzer to ON or OFF at a certain condition.
4-4-1: HDD MANAGEMENT
The HDD management screen displays information about the HDD including model, serial,
blocks, size, and speed. The following options are available:
• OVERWRITE:
Allows the DVR to overwrite old footage when it runs out of disk
space. This is useful for continuous recording, and allows you to
record indefinitely without the need to erase your recorded footage.
• FORMAT HDD:
Format the HDD to factory specifications. Warning: Formatting the
HDD will erase all of your recorded footage. If you decide to install a
different HDD, it is necessary to format it before you begin recording.
1. If the DVR is set to MOTION RECORDING and the DVR keeps recording
continuously or is not triggered to record as you expect, please check the sensitivity
settings and the motion mask setup in CONFIGURATION►MOTION SETUP.
2. If the motion settings are not sensitive enough, you may want to lower the sensitivity
level and define a motion detection area for more accuracy. If the motion is not
triggered as your expectation, you may want to increase the sensitivity level, clear
the motion mask, or enlarge the detection area.
