DFDVR2
38
Step 2:
Enter ‘admin’ in the User Name and ‘1234’ in the Password dialog box followed by ‘OK’ to
enter the Netopia configuration page.
Step 3:
Select Expert Mode.
Step 4:
- Select the Yes, enter expert mode button
- Select Configure followed by selecting NAT.
Step 6:
- Select the Define Custom Service button
- Select Port Forwarding Range of Ports, followed by Next.
Step 7:
In the Port Range screen, proceed as follows:
- In the Service Name field, type DVR
- In the Global Port Range field, enter in the first box, the first number of the port you
need to port forward (e.g. 50000) and in the second box the ending port number
(e.g. 50000)
- In the Base Host Port enter the first port to be forwarded
(e.g. 50000)
- In Protocol, select TCP
- Select the Next button when complete
Step 8:
In the Nat Configuration Menu, use the Service Name down box and select the
configuration just created. Select the Enable button.
Port forwarding is now complete for the Netopia router!
6-2-8: MOTOROLA ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your DVR.
Regardless of the Motorola router being used, the process of port forwarding is similar.
You will need to enable the ports by locating the port range forwarding screen. The set
up instruction outlined below is an example of port forwarding a Motorola Router using
Motorola Model SBG 1000.
Step 1:
Open your web browser. Enter the router IP address 192.168.0.1 in the address bar,
followed by pressing Enter.
Step 2:
Enter ‘admin’ in the User ID and ‘motorola’ in the Password dialog box followed by clicking
‘Log In’ to enter the Motorola configuration page.
Step 3:
Select the Gateway button
Step 4:
Select the Port Forwarding button
Continued on next page......
