DFDVR2
32
6-1-2: VIA ADSL
VIA ADSL WITH STATIC IP ADDRESS
1. Connect the network cable from the ETHERNET port of your DVR to an open LAN port
on your router.
2. Enter SYSTEM MENU ► EXTERNAL DEVICE ► TP/IP SETUP ► IP SETUP. Enter the IP
address, gateway, and subnet mask provided by your ISP.
3. Use the default port number, or change it to a custom port number (it is recommended
that you use the default port number).
4. If you find that you cannot enter or change any settings, check to see if DHCP is set to
Automatic. Press MENU to go back to the previous page (TCP/IP Setup), and then
enter IP SETUP. Select DHCP MODE and press ENTER to switch DHCP to MANUAL.
VIA ADSL WITH DYNAMIC IP
1. If you have ADSL with a Dynamic IP address, the network administrator assigns you an
IP address from their pool when you or your ISP reboots the network and you may get a
different IP address from time to time.
2. If you are using ADSL service with a Dynamic IP, you must add a router in the network
system, unless your DSL modem has a built-in router.
3. Go to EXTERNAL DEVICE ► TCP/IP SETUP ► IP SETUP to enter the IP address for
the DVR and the values for your gateway and subnet mask. The gateway IP is your
router’s IP address and the subnet mask should match the subnet mask values of
your router.
Continued on next page......
