manualshive.com logo in svg

Dedicated Micros DV-IP NV8, Installation Manual

Share
Download
Dedicated Micros DV-IP NV8 Installation Manual Download Page 90

90

DV-IP NV8

90

 

Remote codec     When selected, the unit will utilise the codec 

in the remote NetVu connected video server/

camera to allow change Multimode profiles and 

perform additional activities such as VMD and 

Activity Detection as if the codec was an integral 

part of the DVR. If ‘Remote codec’ is selected, 

the loading on the unit’s internal codecs will be 

reduced.

IMPORTANT:  The Remote codec option is only applicable for NetVu Connected cameras.
Note:    Additional IP cameras (further to existing local camera channels) are remote codec only.  

Therefore any NetVu connected cameras will be applied above local camera level.

When ‘Simple Stream’ and ‘Recode Stream’ are selected via ‘IP Mode’, the following options will  

be available:

IP Address 

Enter the URL address of the image source.

Channel 

If the URL is a multichannel device (e.g. DV-IP NV1), this specifies 

which channel to use. 

Both types

Live Trans (Red) 

Select to open the Network->Live Trans page

View Profile (Green) 

Select to open the Record Settings->Profile Record page

Basic (Yellow) 

Select to open the Serial Ports->Camera page.

Lens Setup (Blue) 

Select to open the Camera Lens Configuration page

Refresh (Purple) 

Refreshes the information on the current page.

Summary of Contents for DV-IP NV8



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands