Dedicated Micros DV-IP NV8, Installation Manual

Page: 23 / 242

23
NV1
Installation Guide
23
KBD
USB NET
AUDIO
IN
VID 1 MON
B
VID 2 VID 3
SATA1
OUT A
VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 VID 16
ALARMS RELAYS SERIAL 1
SERIAL 2
SERIAL 3 PTZ SERIAL 4 PTZ
AUDIO
IN
OUT
EXP
O
I IR
MON A
HDMI 1
VID 17 VID 18 VID 19 VID 29 VID 24 VID 22 VID 20 VID 21 VID 23 VID 25 VID 26 VID 28 VID 27 VID 30 VID 31 VID 32
NET
Layer3 Enhanced
CCTV Switch
Shows as
Camfail
Shows as
Camfail
NET 1 NET 0
POE IN
POWER VID IN SERIAL 1
SERIAL 2
1 3
4
2
Key
Port Free
Analogue Connection
Single IP connected
Single IP assigned
Multiple IP connection
Unknown
IP detected
Analogue channels take precedence. If an analogue camera is present and connected then it will
only become Port Free if the channel is set to Not Connected on the Closed IP NVR configuration
pages.
The de-allocated cameras are added to the Camera->Un-allocated Cameras page on the NVR,
which shows a tabulated list of all un-allocated cameras connected to the switch, showing all
the camera details (DNS, Auto IP Address, MAC, Classification, Channel number and Native
resolution). Each camera has a drop down list showing all ‘Port Free’ channels available for
allocation to the video source.
Any errors in setting up the cameras can be rectified by simply disconnecting and reconnecting
the camera to the switch in whilst configuration mode, which will allow the camera to reallocate.
If multiple changes are made, it is recommended that the NVR is reset after correcting the
configuration to ensure perfect allocation.
IMPORTANT: For further information refer to the Layer 3 Enhanced CCTV Switch manual