Dedicated Micros DV-IP NV8, Installation Manual

Page: 81 / 242

81
NV1
Installation Guide
81
Maps
This menu allows images to be imported and used as maps that can be displayed in the Viewer
Menus. The map can then have hotspots added to allow quick navigation to individual cameras.
An overview ‘System Selection Map’ can also be added to navigate between different systems.
Configure Map Select the relevant system using the drop down menu, or use the
‘Overall System Selection Map’ option to create a map to navigate
between systems.
The Overall System Selection Map will display all available
numbered systems. Selecting a hotspot then opens the relevant
System camera map.
Graphic Location Enter the location of the relevant map graphic, including the full
IP address of the server holding the map. The map image will be
displayed if linking is successful. The linked map can be in gif or
jpeg format and should not exceed 500 by 350 pixels.
Map Screen Offset These coordinates represent the top left corner of the map graphic
as displayed in the Viewer menu.
Camera Select Select which camera is to be linked to the created hotspot.
Activate Hotspot Select to activate and display the camera hotspot.
Hotspot Radius Enter the radius (in pixels) of the hotspot.