manualshive.com logo in svg

Dedicated Micros DV-IP NV8, Installation Manual

Share
Download
Dedicated Micros DV-IP NV8 Installation Manual Download Page 232

232

DV-IP NV8

232

Camera

This menu allows settings for the Oracle Dome camera to be established and configured. 

Camera ID 

Selected camera channel.

Camera Title 

Title assigned to the selected camera channel.

Backlight Comp 

Select to activate Backlight Compensation. This feature 

compensates for back-lit scenes by enhancing objects which 

would previously have been in silhouette.

Auto Slow Shutter 

The Oracle Domes auto slow shutter feature enables the camera 

to automatically decrease the shutter speed in low light settings to 

help maintain quality of displayed images.

Auto Focus 

The Oracle Domes Auto Focus feature enables the camera to 

best focus on its current view. Select to activate.

Auto Flip 

When the Oracle Domes Auto Flip feature is activated, it will rotate 

a camera 180 degrees when it reaches its maximum upper or 

lower extremity i.e. pointing directly upwards or downwards. This 

enables a camera to continue a tilt manoeuvre i.e. if tilting in an 

upwards direction, when the camera is pointing directly up, it will 

rotate 180 degrees and begin tilting down. If unselected, a camera 

will stop when it reaches its maximum upper or lower extremity.

HyperD Mode 

If the connected Oracle Dome camera is part of the HyperD  

non-wide dynamic range, select to activate the unique wide 

dynamic function.

Summary of Contents for DV-IP NV8



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands