manualshive.com logo in svg

Dedicated Micros DV-IP NV8, Installation Manual

Share
Download
Dedicated Micros DV-IP NV8 Installation Manual Download Page 116

116

DV-IP NV8

116

Schedule

This menu allows the Timer Function names to be configured. The Timer Function enables the unit 

to automatically be put into set/unset mode at specific times on specific days. This can help reduce 

unnecessary alarm triggers. The mode will be set by the DVR that the camera is connected to.
When the unit is in Set or Unset mode, combine with different recording qualities and rates under 

normal and alarm conditions for a high degree of control in a range of situations.

The Setup page allows configuration of the schedule including naming the modes of operation and 

controlling when the unit changes between modes.

The RVRC page allows a user to temporarily switch the unit’s system state into set/unset/ 

override mode.
The Holiday & Weekend menu allows the unit to be automatically switched to Override mode for 

individual days i.e. public holidays or during a weekend (or any defined period).

Summary of Contents for DV-IP NV8



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands