manualshive.com logo in svg

Dedicated Micros DV-IP NV8, Installation Manual

Share
Download
Dedicated Micros DV-IP NV8 Installation Manual Download Page 114

114

DV-IP NV8

114

4. 

Allocate the formatted and mounted storage for video storage by clicking on the 

‘Allocate’ button. Allocation takes between a few seconds and a few minutes, 

depending on the size of the drive, and the Feedback column will display information 

about the allocation process. The unit will require a Reset once allocation is complete.

Note:  The unit application drive is protected, if it is allocated the unit will only remove the video 

folder. Formatting any other device will remove all data. In either case recording on the 

system is halted while formatting and, if already allocated, the formatted device will be de-

allocated as a video storage device

Summary of Contents for DV-IP NV8



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands