Dedicated Micros DV-IP NV8, Installation Manual

Page: 88 / 242

88
DV-IP NV8
88
IMPORTANT: The menu options displayed will differ depending on the camera ‘Type’
selected here.
Fail Rep Select this option to generate a Failure report in the event of
camera connection failure.
Termination The input is automatically terminated, this setting should be
disabled if the video feed is looped through.
Telemetry If a telemetry capable camera is connected, the appropriate
control protocol should be selected from the accompanying drop
down list, refer to ‘Appendix J’ for details of supported
telemetry protocols .
Note: A serial port should be assigned if a serial protocol is used.
Default to preset If a telemetry camera has been assigned a preset position, select
the chosen preset position here. Enter the time period (in minutes)
of inactivity which will result in the camera moving to its preset
position, refer to Viewer menus->Program Page for guidance on
assigning camera presets .
after X mins This is the default setting referred to above in ‘Default to preset’.
Note: The following settings will change depending on the type of camera connected.
If a Local Analog Camera is selected
Colour Select a colour value from -8 to +8 via the slidebar or enter a
number directly into the accompanying textbox.
Brightness Select a contrast value from -8 to +8 via the slidebar or enter a
number directly into the accompanying textbox.