manualshive.com logo in svg

Dedicated Micros DV-IP NV8, Installation Manual

Share
Download
Dedicated Micros DV-IP NV8 Installation Manual Download Page 162

162

DV-IP NV8

162

Feature Mapping Page

The following menu allows purchased advanced feature licenses to be assigned to specific Third 

Party IP camera channels
Important: 

This menu will only be available when an 

Analytics

Capable license or the Third 

Party IP camera feature has been unlocked.

Feature 

All installed advanced licenses will be listed by type i.e. ANPR, 

Tripwire, IP Cams etc.

Channel 

Assign the license to a camera channel via the drop down list.

Region 

This is the number of detection areas available for each license. 

Most licence types have 16 detection zones available (except 

ANPR licenses were only 1 is available).

Important: 

‘Region’ is not relevant for the Third Party IP Camera feature.

Type 

Details the Feature type currently installed.

Reset (Red) 

Select to reset the unit.

Refresh (Purple) 

Refreshes the information on the current page.

Summary of Contents for DV-IP NV8



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands