Dedicated Micros DV-IP NV8, Installation Manual

Page: 22 / 242

22
DV-IP NV8
22
Multi channel encoder camera allocation (DV-IP NV1)
A NetVu Connected multi-channel server can be can be added to any of the camera ports as a video
source. The available channels are then allocated as the Layer 3 Enhanced CCTV Switch detects
video sources on the NetVu Connected multi-channel server and allocates them to consecutive Port
Free channels, starting at the port on which the video source is added. If the process encounters
a channel that does not have “Port Free” status then the video source will be added to the un-
allocated list; consecutive cameras will only be applied to channels that are Port Free.
For example the Layer 3 Enhanced CCTV Switch has channel ports 1,3,4 listed as Port Free, 2 is an
Analogue camera. If one 4 channel ICR encoder is added to camera 1. The result is;
► ICR Encoder - Camera 1 -> Camera 1 NVR
◄ ICR Encoder - Camera 2 -> Unallocated, Cameras
► ICR Encoder - Camera 3 -> Camera 3 NVR
► ICR Encoder - Camera 4 -> Camera 4 NVR.
KBD
USB
NET
AUDIO
IN
VID 1 MON
B
VID 2 VID 3
SATA1
OUT
A
VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 VID 16
ALARMS RELAYS
SERIAL 1 SERIAL 2
SERIAL 3 PTZ SERIAL 4 PTZ
AUDIO
IN
OUT
EXP
O
I IR
MON A
HDMI 1
VID 17 VID 18 VID 19 VID 29 VID 24 VID 22 VID 20 VID 21 VID 23 VID 25 VID 26 VID 28 VID 27 VID 30 VID 31 VID 32
NET
Layer3 Enhanced
CCTV Switch
Port reserved for
analogue
connections on NVR
Video source
added to
un-allocated list
NET 1 NET 0
POE IN
POWER VID IN SERIAL 1
SERIAL 2
1 3
4
Key
Port Free
Analogue Connection
Single IP connected
Single IP assigned
Multiple IP connection
Unknown
IP detected
2
When a multichannel encoder is connected to the Layer 3 Enhanced CCTV Switch, the NVR will
receive information from the encoder about how many cameras are connected. Channels set as Not
Connected on the encoder, when presented to the Enhanced Layer 3 switch will not be eligible for
Auto IP.
In the scenario shown below, the NVR is set at defaults and the Layer 3 Enhanced CCTV Switch
has an ICR encoder with three analogue camera inputs connected at positions 1, 3 and 4. Position 2
is not used. The Closed IPTV NVR would be auto configured on consecutive ports, camera 2 would
not be allocated to port 2 which would be registered as assigned to a failed camera.