Dedicated Micros ©2009
D
V-IP Expr
es
s
E Mail
The unit can automatically transmit an e-mail to an SMTP Server under numerous conditions i.e. on
start up, on receipt of an alarm, camera failure etc. This allows the unit to be installed in unmanned
applications where a Remote Video Response Centre �or Manager etc.) would be notified by e-mail
if any of these conditions occur.
Connection �rofile
�t is possible for the e-mail to be transmitted �ia the �thernet
network or dial up connection (��� ‘�oint to �oint �rotocol’).
This setting presumes that a modem has been connected or
configured and the unit is connected to a ��N or ��N and
allocated a �alid �� address.
Mail Server Address
This is the IP address or URL of the SMTP Server that the e-mail
will be sent to. The S�T� ser�er will then forward this to the
intended recipient.
Recipient �mail
This is the e-mail address of the intended recipient.
Display Name (Recipient)
This is the addressee name that will be shown in the email name
field.
Reply to �mail
This field must be configured if the recipient is to reply to an e-
mail. The unit does not accept incoming e-mails therefore ensure
this is a �alid e-mail address.
Display Name (Reply To)
This is the ‘reply to’ name that will be shown in the email name
field.
Sender �mail
These optional fields indicate the source of the e-mail notification.
�f the fields are left blank the unit will use the system name to
create a sender name.
Display Name (Sender)
This is the sender name that will be shown in the email name
field.
