manualshive.com logo in svg

Dedicated Micros DV-IP Express, Nstallation And Operation Manual

Share
Download
Dedicated Micros DV-IP Express Nstallation And Operation Manual Download Page 131

Dedicated Micros ©2009

11

D

V-IP Expr

es

s

Appendix E

Unit Specification

LANGUAGES 

Currently: �nglish. For Future De�elopment: French, �talian, German & Spanish. 

CAMERAS

8, 12 and 16 camera inputs a�ailable. �uto detection on power up.  �ooping �NC connectors are pro�ided for each 

camera input on all input �ariants.
Option to �iew �i�e or Replay all or selected cameras without affecting recording.

MONITOR VIEWING

Main monitor:

Full screen, picture in picture, quad �iewing and multiscreen.
�on �: Composite �ideo �NC connector and S-�ideo.

VGA Monitor �utput
Spot monitor:

Full screen, sequence.
�on �: Composite �ideo �NC connector.

ACTIVITY DETECTION

�ach acti�ity detection will switch the selected camera from normal record profile to alarm record profile. This feature 

can also; log the e�ent, acti�ate a relay, trigger a sounder, switch camera or link to an alarm.
�ndi�idual configurable alarm responses include; mo�e camera to preset, acti�ate a relay, remote alarm reporting, email 

on alarm, log e�ent, switch camera, acti�ate sounder.

ALARMS & RELAYS

20 normally open�closed tamper proof alarm inputs �ia back panel.
�eyswitch input to select set�unset.
4 relay outputs.

AUDIO

The user has the option to record and play back audio through the unit in real time. Recorded with images, audio can be 

played back directly from the unit �ia powered e�ternal speakers.
�udio output for on site ���Challenge.

Connections:

�ine in: 1� pk-pk, RC� phono socket.
�ine out: 1� pk-pk, RC� phono socket.

SEARCH AND PLAYBACK

•   Frame ad�ance�rewind, fast picture search and pause keys.
•   ��ent list, including e�ent list filter with unique quadrant pre�iew facility.
•   �ideo Timeline.
•   �layback in quad, multiscreen, picture in picture and full screen.

Multi

Mode

 RECORDING

Multi

Mode

 recording gi�es you the ability to set different record rates, resolutions and compression algorithms    

(���G-4�J��G) across scheduled, normal and alarm modes dynamically on indi�idual cameras.  

RECORDING FROM

�layback and record to hard disk simultaneously.
�larmed or manually selected images can be protected from being o�erwritten.
Timed e�piry option allows images to be held for a selected number of days. 

Summary of Contents for DV-IP Express









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands