Dedicated Micros ©2009
110
D
V-IP Expr
es
s
PTZ Program Option
The Program page allows preset settings for PTZ cameras to be established and an ‘Origin’ base
position established for a camera.
Note:
This page will not be available for all cameras.
Red
Dome
Select to display the Dome �enu page.
Green
Store
Use to sa�e the current �iew as a �reset for this
camera. �ress this button then a preset position
(using the numeric keys on the �R Remote
Control or optional �eyboard if �iewing �ia a
local monitor).
To re-send the camera to this position, select
the camera, then press Ne�t -> �reset -> (preset
number).
Note:
When entering a new preset, any previous preset assigned to that number (for the same
camera) will be overwritten.
��ellow
Select
This option will send the camera to
the stored ‘�reset1’ position.
�lue
Set Origin
The Origin option allows a base position to
be established for the Oracle dome camera.
The camera will register this position as zero
degrees. �ny command that sends the camera
to a coordinate will use this origin as its starting
point.
Refer to ‘Console Settings:-Map Config
:-Hotspot Origin’ for more information)
.
Note:
This option is only available for Oracle dome cameras.
�urple
�ack
Return to the pre�ious page of the �iewer menu.
