Dedicated Micros DV-IP Express Nstallation And Operation Manual Download Page 132

Page: 132 / 136

V-IP Expr

EVENT COPYING

��ent sequences and user defined recorded sequences can be sa�ed to a CD or D�D �ia the integrated CD-writer �

D�D-writer or to an e�ternal ��ash dri�e through the US� port.

TEXT SUPPORT

Through the inclusion of Te�t Support, the D�-�� press can search captured transaction data for specific goods

purchased, transaction numbers, credit card references, keywords etc. and jump straight to the associated �ideo

sequence. Till interfaces are a�ailable for a wide range of till systems.

NETWORKING CAPABILITIES

� standard �thernet connection allows li�e and recorded �iewing on a networked �C using D�’s Net�u Obser�er

software. �eb pages are a�ailable for configuration and li�e �iewing using a standard internet browser.

I.R REMOTE CONTROL

Offering full system control.

OPTIONAL KEYBOARDS

NetVu Console

Supports Dedicated �icros keyboards:
D��C1
D��C2

TELEMETRY

�uilt-in RS485�Twisted pair protocols pro�ide direct control of the numerous domes including but not limited to the

following:

Coax
•�  BBV
•�  BBV RX100
•�  Pelco Spectra
Serial
•�   Dedicated Micros �racle Dome
•�  AD Matrix/AD 168-Matrix
•�   BBV RE485 StarCard
•�  Bosch/Philips G3
•�  Dennard/Dennard C
•�  Ernitec

• J�C T�-C675��, T�-C676 & T�-C553�
• �ark�ercer

•�  Panasonic WV-CS600/WV-CS850
•�   Pelco C
•�  Philips/Philips 232
•�   Samsung SCC-641
•�   Sensormatic SpeedDome IV & SpeedDome V

• Ultrak Ultradome �D6
• �ista �ower Dome

COLOUR RESOLUTION

Sampling rate: 13.5 �Hz to CC�R 601.
Number of pi�els: �� 704h � 256� 288.
NTSC 704h � 240�.
16.8 million colours 256 le�els of grey, 8-bit luma.

COMPRESSION

J��G & ��G-4 format files.
4C�F, 2C�F, C�F & �C�F resolution.
User definable file size and bit rate.

Summary of Contents for DV-IP Express









































































































































Search results

Summary of Contents for DV-IP Express

Reviews:

Brands by name

Popular brands

Dedicated Micros DV-IP Express, Nstallation And Operation Manual

Search results

Summary of Contents for DV-IP Express

Reviews:

Brands by name

Popular brands