453
Lamborghini Countach LP 500S
Insert a 2.6 × 6mm screw into the front
hole of the window (arrowed).
Half-tighten the screw into the hole.
Half-tighten a second 2.6 × 6mm screw
into the hole towards the rear of the
window. When both screws are in place,
and the window is sitting properly in its
position, tighten them fully.
Place the right door hinge and the door
hinge holder (Stage 77) as shown above.
The post in the centre of the right door
hinge is D-shaped, with a hole in it.
19
20
21
22
Align the end of the door hinge holder with the slot in the
middle of the right door hinge, as shown.
Pass the end of the holder into the slot in the hinge. Stop
pushing it through at the point shown above.
Place the assembly at the front of the right door,
below the window.
23
24
25
Summary of Contents for MODEL SPACE Lamborghini Countach LP 500S
Page 1: ...WALTER WOLF MODEL Pack 24 ...