459
Lamborghini Countach LP 500S
Lower the front fender slightly, passing the door struts
through the holes in the rear of the fender (outlined).
Push the tabs at the bottom of the front
fender into the recesses in the chassis.
Hold the assembly together and turn it
over. Insert a 2.6 × 6mm screw (Stage 78)
into the circled hole above.
Tighten the screw into the hole.
Push the posts of the front fender into
the holes in the main body.
24
25
26
23
Place the main body assembly (Stage 77) as shown. Align
the two posts at the rear of front fender with the indicated
holes in the front of the main assembly. Make sure that the
doors are in the raised position.
Lower the doors until the struts enter the slots in their front
edges (circled).
20
21
22
Summary of Contents for MODEL SPACE Lamborghini Countach LP 500S
Page 1: ...WALTER WOLF MODEL Pack 24 ...
