460
Lamborghini Countach LP 500S
Tighten another 2.6 × 6mm screw into
the hole in the tab in the other side
of the fender.
29
Insert the larger post at the end of the
wiper (Stage 78) into the larger hole
(indicated) in the front fender.
30
Turn the body over, and tighten a 2.3 ×
6mm self-tapping screw (Stage 72) into
the hole indicated above, to secure the
wiper. Then remove the masking tape
holding the headlamp link bar.
Collect the wires from the left headlamps
together. Then peel a strip off the black
tape sheet (Stage 78) and stick it over the
collected wires to fix them to the
underside of the fender. Repeat this
process on the right side as well.
Collect all the cables from the front end
of the assembly, and pass them under the
chassis (circled).
Tighten a 2.6 × 6mm screw (Stage 78)
into the hole in the tab at the bottom of
the fender.
Then insert the smaller pin into the
adjacent hole (indicated).
Tighten another 2.6 × 6mm screw into
the indicated hole in the right side
of the chassis.
32
33
34
28
31
27
Summary of Contents for MODEL SPACE Lamborghini Countach LP 500S
Page 1: ...WALTER WOLF MODEL Pack 24 ...
