468
Lamborghini Countach LP 500S
Half-tighten a 2.6 × 6mm screw into the
hole indicated above.
Half-tighten the remaining 2.6 × 6mm
screw into the indicated hole at the front
of the underbody. When all of the screws
from Steps 30-33 are in place, tighten
them fully.
Half-tighten a 2.6 × 6mm screw into
the hole on the other side of the
underbody. Fully tighten the four
screws from Steps 25-27.
Half-tighten the screw into place.
Slide the rear under grill (Stage 79)
between the silencers and the body.
Half-tighten another 2.6 × 6mm screw
into the indicated hole in the underbody.
Half-tighten a 2.6 × 6mm screw into the
hole on the opposite side of the
underbody.
Insert a 2.6 × 6mm screw into this hole at
the front of the underbody.
32
33
28
30
34
27
31
29
Summary of Contents for MODEL SPACE Lamborghini Countach LP 500S
Page 1: ...WALTER WOLF MODEL Pack 24 ...
