471
Lamborghini Countach LP 500S
Push one of the wheel caps into place in
the centre of the wheel. Repeat Steps
52-56 to fit the right front wheel.
Align the posts on the inside of the right
door sill (Stage 79) with the indicated
holes in the right-hand side of the body,
below the bottom edge of the door.
Remove the front axle from the left front
hub and place the brake disc (Stages 36
or 37) onto the hub, with the notch
positioned as shown.
Hold the front wheel in place, and insert
the axle into the hole in the centre.
Push the right door sill into place. It
should be flush with the adjacent panels.
Push the cap into the hole. The cap has a
magnet inside it, which will hold it in
place. Repeat Steps 44-51 to fit the left
rear wheel.
Screw the front axle into place. The wheel
should remain able to spin freely.
Hold one of the front wheels so that the
ridge on the inside (circled) is aligned
with the notch in the brake disc, and then
fit the wheel to the disc.
56
57
52
54
58
51
55
53
Summary of Contents for MODEL SPACE Lamborghini Countach LP 500S
Page 1: ...WALTER WOLF MODEL Pack 24 ...
