3. Remove the battery cover by placing a thin bladed screw driver between the battery
and the black battery cover and gently pushing the tip of the blade away from the
battery while lifting up on the battery cover. It may be necessary to duplicate this
step on both sides of the battery.
Removing the Battery Cover
4. With the battery cover removed, note the orientation of the battery and then grasp
the battery on the sides and pull it out.
5. Orient the new battery properly over the battery connector and and push it into place.
6. Reinstall the battery cover.
7. Reinstall Genesis MP’s side door panel by tightening down the four screws.
Genesis MP
Chapter 3 – Connecting Additional Peripherals
◆
55