Genesis MP
Chapter 3 – Connecting Additional Peripherals
◆
49
10. Connect the SCSI ribbon connector to the drive.
Note: This connector is designed to fit in only one direction, so be sure to orient the
connector properly. This means that the rib in the SCSI ribbon cable should mate
with the notch in the SCSI connector.
Connecting SCSI Ribbon Cable
11. Connect the SCSI power connector to the drive.
Note: This connector is designed to fit in only one direction, so be sure to orient the
connector properly.
Connecting SCSI Power Cable
12. Reinstall Genesis MP’s side door panel by tightening down the four screws.
13. Using the software that came with the drive, or the software included with Genesis
MP, format the drive.
Rib in SCSI Ribbon Cable