Genesis MP
Chapter 3 – Connecting Additional Peripherals
◆
45
4. Locate and unscrew the two hand screws on either side of the nPOWER card brack-
et. Be careful to support the card as the last screws are unscrewed.
Note: These screws are designed to stay attached to the bracket once they have been
unscrewed from the chassis.
Locating the nPOWER
card bracket
5. Holding both sides of the nPOWER card bracket, firmly pull the bracket away from
the chassis to remove the card from the motherboard nPOWER processor slot.
Removing the nPOWER card
6. Once the nPOWER card and its bracket have been removed from the chassis, place
the unit —with the metal bracket side face down—on a clean flat surface
7. Remove the nPOWER card from the bracket by unscrewing the four Phillips head
screws in each corner of the nPOWER card.
4 Phillips Head Screws
nPOWER card bracket
4 hand screws
4 phillips head screws
