Chapter 3 – Connecting Additional Peripherals
Genesis MP
48
◆
5. Following the directions that came with the SCSI drive, select a unique SCSI ID
number for the device and disable termination.
Note: The last drive in the internal SCSI chain should be the only one providing
termination.
6. Locate an empty 3.5" bay in Genesis MP and move the SCSI ribbon cable to the
left and the SCSI power cable to the right.
Moving SCSI & Power Cables
Note: If you have multiple internal 3.5" drives installed and are installing a 1.6"
high drive, you may need to move previously installed devices in order to make room
for your new drive.
7. Position the drive in front of the bay so that the drive’s SCSI connector is on the left
side and the power connector is on the right.
8. Slide the new SCSI drive into the bay with the drive rails between the three metal
flanges found on either side of the drive.
Inserting 3.5" Drive
9. Once you slide the drive completely into the drive bay, the rails will then lock the
drive in place.
