Chapter 3 – Connecting Additional Peripherals
Genesis MP
38
◆
Opening Your Genesis MP
It’s easy to get inside your Genesis MP. Just remove the side door panel.
Opening Your Genesis MP
Genesis MP ships with a keyed lock that allows you to control the access to the inside
of your Genesis MP.
Note: If you are not concerned with the security of your machine, you can leave the key
installed in the lock for ready access.
1. Before you open the machine, be sure to turn your Genesis MP—and all peripherals
attached to it—completely off.
2. Unlock the key lock on the side door panel.
3. Unscrew the four hand screws on the rear of the side panel by turning them counter
clockwise. They will not come completely out of the side panel.
4. Slide the side door panel back about 1/2" and pull the side panel away from
Genesis MP.
Removing the Side Door
CAUTION
Before you begin any installation, put on the anti-static wrist strap that came with
Genesis MP. Follow the instructions that came with it.
Hand screw
unlocked
Hand screw
locked
Key lock
4 hand screws
∆
!
