3
The motor, controller and power specications should be
properly matched, otherwise it may cause abnormal
operation and even burn the device;
CAUTION
If the controller appears to have vibration, noise, heat or
peculiar smell during initial operation, cut off power
immediately and contact authorised Dayliff retailer.
CAUTION
Do not install the controller under direct sunlight or rain.
When moving the controller lift it by its base and not by the
panel, may cause the main unit to fall off which may resulting
in personal injury.
CAUTION
CAUTION
Install the controller on reproof material (such as metal) to
avoid re.
CAUTION
When powering off, ensure indicator light is completely
extinguished, so as to ensure the device is discharged
completely.
CAUTION
Before opening the controller, ensure that all power lines are
disconnected. Wait at least 5 minutes until DC Bus capacitors
discharge.
CAUTION
3. WIRING
3.1 Main Circuit Terminals Wiring
PE
POWER
R (L)
S (N)
U
V
T
Mains circuits terminals wiring diagram for PVm15
W
MOTOR
PE
POWER
1AC Input
To Single
Phase Motor
L
N
V
W
MOTOR
Ground
Mains circuits terminals wiring diagram for PVm22
