DAYLIFF DGW 200P, Installation & Operating Manual

Page: 15 / 28

12
Battery
Operating the generator
Ÿ Warm up the engine without load for about 3 minutes.
Ÿ The generator is equipped with low oil warning system, and will stop automatically in
case of low oil pressure or a lubrication oil shortage. The engine also will stop if
restarted without lubrication oil . Check the oil level and refill as necessary.
Ÿ Do not loosen or readjust either the engine speed limiting bolt or fuel injection limiting
bolt as these are well adjusted ex-factory otherwise, performance may be affected.
During operation look out for the following warning signs
Ÿ Abnormal sound or vibration.
Ÿ The engine misfiring or running rough.
Ÿ Color of the exhaust gas? (either black or white?)
If the above signs are observed stop the engine and consult the nearest Dayliff retailer.
Engine
Speed
Limiting
Bolt
Fuel Injection Limiting Bolt
Operating the Diesel Welding Machine
CAUTION
The operator must be familiar with the structure, performance,
working principle, operating procedures and precautions of
the welding unit.
CAUTION
The operator must undergo technical and safety training.
Pre-weld inspection;
Ÿ Check that the welding mask does not have light leakage, damage. Welding
personnel and auxiliary personnel should wear the personal protection clothing.