DAYLIFF DGW 200P, Installation & Operating Manual

Page: 21 / 28

18
Changing Engine Oil (every 100hrs)
Ÿ Remove the oil filler cap.
Ÿ Remove the drain plug and drain the used oil while the engine is still warm. The plug is
located on the bottom of the cylinder block.
Ÿ Tighten the drain plug and refill with the recommended oil.
Ÿ Put back the cap.
Oil Filler Cap
Drain Plug
Element
Changing the Air Cleaner Element
CAUTION
Do not wash the air cleaner element with detergent because
this is a dry type element
CAUTION
Never start the engine without the element, or with a defective
element. Change the element in good time.
Cleaning and replacing the fuel lter
The fuel filter also has to be cleaned regularly to ensure maximum engine output.
1. Drain the fuel oil from the fuel tank
2. Loosen the small screws of the fuel cock and pull out the filter from the tank. Wash the
filter thoroughly with diesel fuel. Remove the lock nut, end cap and diffuser discs and
clean the carbon deposit.
Tightening Cylinder Head Bolts
Checking the injection nozzle, injection pump
1. Adjusting the valve head clearance for the intake and exhaust valves
2. Lapping of intake and exhaust valve
3. Replacing the piston ring