DAYLIFF DGW 200P, Installation & Operating Manual

Page: 12 / 28

9
CAUTION
Avoid applying any heavy load during the break in period.
CAUTION
Change engine oil regularly.
CAUTION
Change the engine oil every 20 hours or one month after the
initial use and every 3 months or 100hours thereafter
Starting the diesel welding machine
Recoil starting (manual start)
The engine is started in the manner described below
1. Open the fuel cock (to the ‘ON’ position).
Ÿ On the other hand, too much oil is dangerous because the oil may combust and
cause a sudden and excessive rise in engine revolutions, so before operating the
machine, be sure to check the oil and supply oil to the specified level.
Break In Operation
When the generator is still new, application of heavy loads may shorten the life of the
engine.