24
TROUBLESHOOTING (CONT)
Other Actions for troubleshooting
Problem
Action
Chlorine level is low.
Check the following:
• Media Filter needs backwashing
• Cell production set too low
• Pool stabiliser too low
• pH too high
• Salt level too low
• Pool size set too low
• Chlorinator run time too low
No chlorine production.
Check the following:
• Mains power switched on
• Cell production is set above 0%
• Not in cell off mode
• Not in timer inactive period
• Filter needs backwashing
• Pump not plugged in or faulty
• Another fault has stopped chlorination
Display is on but not responding.
Restart the unit, if this problem reoccurs please contact your dealer for service.
Display is not turning on.
Check mains power. In hot climates the display may have overheated, allow it to cool down
before reapplying power. If this problem reoccurs please contact your dealer for service.
Chlorinator does not detect when the
pool cover micro switch is closed.
Check micro switch is correctly wired across the pool blanket pins of the terminal block.
Ensure the micro switch is a normally open type and is connected using adequate gauge
wires of minimal length.
Summary of Contents for ProMatic 24
Page 26: ...26 35mm 1 3 8 80mm 3 5 32...
Page 27: ...27 NOTES...
