![background image](http://html.mh-extra.com/html/daum-electronic/cardio-pro/cardio-pro_user-manual_514131007.webp)
User's data
System Settings
If you want to change the user's data you should always note the
presently selected user. This information will always be shown in
heart rate window. (see Choosing the User p. 4)
Pulse display
188
OK
You can also enter your own limit values. If one of these values is exceeded the system
plays an signal melody.
Watt
Pulse
Time
Km
kJoule
you can select here the maximal load (between 25 and 400 watts).
If you choose e.g. 180W the load will not exceed this value
when the actual heart rate exceeds the entered limit value the system
reduces automatically the applied load.
a signal melody plays when the time limit is exceeded.
a signal melody plays when the distance limit is exceeded.
a signal melody plays when the kJoule limit is dissipated.
5
SLP
Dissipated Energy/
Elapsed Time Window
The device switches automatically to stand-by
mode if it is left switched on and unused for two
hours. This is indicated by the display of “SLP”
on the dissipated energy/elapsed time window.
(the stand-by mode is deactivated when using
ergo_memo or ergo_win.).
Press the control button to restart
the device from stand-by mode.
Stand-By Mode
You can set the system to confirm the starting point of the training before every training
program. If the “Start Point” option is turned on, you can choose the starting point of the
course. If it is turned off then the program begins always at the start of the course.
Turn and press the control button to enter and store your physical data.
Birth date
Sex
Height
Weight
Body fat
Fitn. grading
enter your birth date.
choose M or F to enter your sex.
enter you height in cm.
enter your weight in kg.
enter your body fat content (if available).
select the value most appropriate for you.
Frequency
enter the number of times you want to train per week
menu
menu
Press the
control button
Press the
menu key
Turn to select
“User's data”
Press the
control button
Turn to select
“Settings”
watt
User 1
Back
Body data
Limit
Start point
Delete
watt
watt
User 1
Back
Body data
Start point
Delete
Limit
User 1
Back
Body data
Limit
Delete
Start point