![background image](http://html.mh-extra.com/html/daum-electronic/cardio-pro/cardio-pro_user-manual_514131025.webp)
Attach the dashboard to the handlebars column
by means of the recessed head screws and
the washers
Remove the perforated plate cover on
the left side, looking to the front direction.
For this pull the plate from below.
Connect the connector of the cable from the dashboard
with the cable from the frame.
Installing the dashboard and the handlebars column
Slide the dashboard holder
from below upwards on the
handlebars column. The
dashboard holder will be
attached by means of screws
later.
SW 6
C / 2x
D / 2x
SW 8
F / 2x
G / 2x
23
Pull the dashboard cable through
the handlebars column.
Insert the handlebars into the front opening of the frame.
Use the recessed head screws (1) and washers to
attach together the frame and the handlebars column.
Since the handlebars column is not yet attached at
this moment, please take care to keep it upright
(straight). Then attach the handlebars column by
alternatively screwing in the two pre-installed screws
(2) until it is immobilised. The immobilising screw on
the right side can be reached through a hole in the
perforated plate triangle on the right side.
2
1