Fine Tuning
A comfortable and relaxed sitting posture is crucial for ensuring that
training with the ergo_bike be effective and useful. Just like riding
a street bike, your back should be straight and your legs should bend
slightly at the knee when the pedals reach their lowest point.
This posture is illustrated in the drawing to the left.
26
To adjust the height of the saddle, loosen the toggle button (1)
and pull it out (2). Now you can move the saddle column up
and down (3). When the column is in the required height release
the toggle button to let it engage. Finally tighten the toggle button
back (5) by turning it to the right.
Loosen the tension button on the dashboard holder and
move the handlebars until it stops in the required position.
Retighten the tensing button after you put the handlebars
in the required position.
13
15
To adjust the inclination of the saddle loosen
the two nuts under the saddle. Put the saddle
in the required position and the retighten the
two nuts.
The sitting position can be adjusted by mean of the sliding rail
of the saddle holder. Loosen the tommy head button underneath
the sliding rail and slide the saddle to the required horizontal
position. After adjusting the saddle position retighten the tommy
head firmly.
If the
is installed on an uneven floor, use
a screwdriver to adjust the compensation setting in
the front feet to ensure a stable stand.
ergo_bike
Front Foot
With compensation setting
for the floor distance
1.
2.
3.
4.
5.
