Datum MobileTrak5, Installation Instructions Manual

Page: 25 / 28

Figure 1X
Figure 1Y
Page 25
MobileTrak5 Rear Panel Installation Instructions
LOWER PANEL CHANNEL
CARRIAGE
#10 x 1/2
TEK SCREWS
UPPER BRACKET
SIDE BRACKET
(ONLY ON PANEL
NEXT TO UPRIGHT)
REAR PANEL
#8 x 1/2 WOOD SCREW
Attach lower channels to the carriage using #10 x
1/2 Tek screws (see Figure 1X). NOTE: Channels
are manufactured 1/8" shorter than the width of
the shelving it's covering (ex. 36" wide shelving will
have 35 7/8" long channels), so space channels
accordingly.
Attach the side bracket to one of the rear panels
using four #8 x 1/2" wood screws (see Figure 1Y).
Position the bracket on the edge of the panel and
center vertically.
On the same panel, attach two upper brackets to
the top of the panel using #8 x 1/2" wood screws
(two per bracket).