Datex-Ohmeda S/5 FM, User Manual

Page: 44 / 94

42
42
Recording on alarms
1. Press the
Print/Record
key .
2. Select Record Waveforms .
3. Select
Start on Alarms - YES
.
Recording is activated when the following alarms reach the red level:
Asystole, Tachy/Brady, Art High/Art Low, V Fib, V Tachy; V Run >3 with
Extended arrhythmia analysis.
Art and ECG1 waveforms are recorded.
Selections are preconfigured.
Recording calculations
1. Press the
Wedge C.O.
key.
2. Select Calculations .
3. Select Hemodynamic Calcs or Oxygenation Calcs.
4. Select Record Calcs .
Recording waveforms
You can record three waveforms to a local recorder, and two to four
waveforms to a network recorder:
1. Press the
Print/Record
monitor key.
2. Select Record Waveforms - Record Wave .
3. If the monitor is connected to the network, you can also use the
network recorder by selecting
Record to Net
. The network
recorder uses the settings of the S/5 iCentral.
4. Stop recording by selecting Stop Wave .
Changing the paper speed
To see the waveforms more clearly or more generally, change the
paper speed:
1. Press the
Print/Record
key.
2. Select Record Waveforms - Paper Speed .
To select other waveforms for recording, press the
Print/Record
key
and select Record Waveforms - Waveform 1, 2, or 3 .